Venza FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 2 JUNCTION CONNECTOR -
STEERING ANGLE SENSOR)
OK -- Continue to next step.
18. CHECK FOR SHORT IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR - POWER STEERING ECU)
(a) Disconnect the power steering ECU connector (D20).