Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-981062.png)
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
Text in Illustration
NG -- CHECK FOR SHORT TO +B IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR - CAN NO. 1 JUNCTION
CONNECTOR)
OK -- Continue to next step.
2. CHECK FOR SHORT TO +B IN CAN BUS WIRE (CAN NO. 1 JUNCTION CONNECTOR)
(a) Disconnect the CAN No. 1 junction connector (A44).
