Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-981079.png)
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 2 JUNCTION CONNECTOR - MAIN
BODY ECU)
OK -- REPLACE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK)
15. CHECK FOR SHORT TO B+ IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR - STEERING ANGLE SENSOR)
(a) Disconnect the steering angle sensor connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
