Venza FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 2 JUNCTION CONNECTOR -
CENTER AIRBAG SENSOR ASSEMBLY)
OK -- REPLACE CENTER AIRBAG SENSOR ASSEMBLY
13. CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR - YAW RATE SENSOR)
(a) Disconnect the yaw rate sensor connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance: