Venza FWD V6-3.5L (2GR-FE) (2010)
11 to 14 V
(b) If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
NEXT -- Continue to next step.
4. CHECK COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*
(a) Using the Techstream, inspect the LIN communication function to ensure there are no malfunctions in the communication system See:
Reading and Clearing Diagnostic Trouble Codes.
Result:
B -- GO TO DIAGNOSTIC TROUBLE CODE CHART See: Testing and Inspection/Diagnostic Trouble Code Descriptions/LIN
Communication System
A -- Continue to next step.
5. PROBLEM SYMPTOMS TABLE
(a) Refer to Problem Symptoms Table See: Symptom Related Diagnostic Procedures/LIN Communication System.
Result:
B -- GO TO STEP 7
A -- Continue to next step.
6. OVERALL ANALYSIS AND TROUBLESHOOTING*
(a) Terminals of ECU See: Pinout Values and Diagnostic Parameters/LIN Communication System
(b) Data List / Active Test See: Scan Tool Testing and Procedures
NEXT -- Continue to next step.
7. REPAIR OR REPLACE
NEXT -- Continue to next step.
8. CONFIRMATION TEST
NEXT -- END
How to Proceed With Troubleshooting
NETWORKING: CAN COMMUNICATION SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING
NOTICE:
*
DTCs for the CAN communication system are as follows: U0073, U0100, U0101, U0123, U0124, U0126, U0129, U0131, U0142,
U0155, U0182, U0230 and U1002.
*
Refer to troubleshooting of each system if DTCs regarding the CAN communication system are not output.
HINT
*: Use the Techstream.
1. VEHICLE BROUGHT TO WORKSHOP