Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-982022.png)
Text in Illustration
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- CHECK FOR OPEN IN CAN BUS WIRE (CAN NO. 1 JUNCTION CONNECTOR - ECM)
OK -- REPLACE COMBINATION METER See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster /
Carrier/Service and Repair/Removal and Replacement/Combination Meter/Removal
4. CHECK FOR OPEN IN CAN BUS WIRE (CAN NO. 1 JUNCTION CONNECTOR - ECM)
(a) Reconnect the combination meter connector.
(b) Disconnect the CAN No. 1 junction connector (A44).
Text in Illustration
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
