Venza FWD V6-3.5L (2GR-FE) (2010)
Fuel Pressure Regulator: Service and Repair
Installation
2GR-FE FUEL: FUEL PRESSURE REGULATOR: INSTALLATION
1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY
(a) Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel pressure regulator.
Text in Illustration
(b) Install the fuel pressure regulator to the fuel filter.
Text in Illustration
2. INSTALL FUEL PUMP ASSEMBLY WITH FILTER See: Fuel Pump/Service and Repair/Overhaul/Reassembly
3. INSTALL FUEL FILTER ASSEMBLY See: Fuel Pump/Service and Repair/Overhaul/Reassembly
4. INSTALL FUEL SENDER GAUGE See: Fuel Tank/Fuel Gauge Sender/Service and Repair/Installation
5. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE
(a) Install the fuel suction tube assembly with pump and gauge See: Fuel Pump/Service and Repair/Removal and Replacement/Installation.