Venza FWD V6-3.5L (2GR-FE) (2010)
Throttle Body: Service and Repair
Removal
2GR-FE ENGINE CONTROL: THROTTLE BODY: REMOVAL
1. REMOVE NO. 1 ENGINE UNDER COVER
2. REMOVE NO. 2 ENGINE UNDER COVER
3. DRAIN ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
4. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
5. REMOVE AIR CLEANER CAP WITH HOSE
(a) Disconnect the 3 hoses and hose clamp.
(b) Disconnect the mass air flow meter connector and wire harness clamp.
(c) Separate the ventilation hose.
(d) Loosen the hose clamp and separate the air cleaner cap with hose from the throttle body.
(e) Release the 3 clamps and remove the air cleaner cap with hose.