Venza FWD V6-3.5L (2GR-FE) (2010)
Spark Plug: Service and Repair
Installation
2GR-FE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: INSTALLATION
1. INSTALL SPARK PLUG
(a) Install the 6 spark plugs.
Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)
2. INSTALL IGNITION COIL ASSEMBLY
(a) Install the 6 ignition coils with the 6 bolts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the 6 ignition coil connectors.
(c) Connect the 3 wire harness clamps.
3. INSTALL NO. 1 SURGE TANK STAY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Unit/Installation
4. INSTALL INTAKE AIR SURGE TANK ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and
Repair/Installation