Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-865001.png)
Knock Sensor: Service and Repair
Removal
2GR-FE ENGINE CONTROL: KNOCK SENSOR: REMOVAL
1. REMOVE INTAKE MANIFOLD
(a) Remove the intake manifold See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal.
2. REMOVE KNOCK CONTROL SENSOR
(a) Disconnect the 2 knock control sensor connectors.
(b) Remove the 2 bolts and 2 knock control sensors.
