Venza FWD V6-3.5L (2GR-FE) (2010)
Transmission Temperature Sensor/Switch: Service and Repair
Removal
U660E AUTOMATIC TRANSMISSION / TRANSAXLE: ATF TEMPERATURE SENSOR: REMOVAL
1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY
HINT
See the steps from "Remove Engine Assembly with transaxle" through "Remove Automatic Transaxle Assembly" See:
Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Removal.
2. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Valve Body/Service and Repair/Removal and Replacement/Removal
3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve
Body/Service and Repair/Removal and Replacement/Removal
4. REMOVE ATF TEMPERATURE SENSOR ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 4 bolts, ATF temperature sensor assembly and clamp from the valve body.
Text in Illustration
(c) Remove the O-ring from the ATF temperature sensor assembly.
Text in Illustration