Venza FWD V6-3.5L (2GR-FE) (2010)
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal.
19. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal.
20. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY
HINT
Use the same procedure for the RH side and LH side See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear
Seat Outer Belt Assembly/Removal.
21. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
and Replacement/Removal
22. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal.
23. REMOVE DOOR CONTROL RECEIVER
(a) Disconnect the connector.
(b) Remove the bolt and the door control receiver.