Venza FWD V6-3.5L (2GR-FE) (2010)
Bolt:
L
35.0 mm (1.38 in.)
M
6.0 mm (0.236 in.)
Pitch
1.0 mm (0.0394 in.)
NOTICE:
*
Tighten the bolts by hand until they become difficult to turn.
*
Do not tighten the bolts excessively.
(2) After connecting the following SST to each other, connect them to the steering pad.
SST : 09082-00802
09082-10801
09082-30801
(3) Wind 3 wires at least 2 times each around each of the bolts installed on the left and right sides of the steering pad.
CAUTION:
*
Tightly wind the wires around the bolts without any slack.
*
Make sure that the wires are tight. If there is slack in the wires, the steering pad may break loose when the airbag is deployed.