Venza FWD V6-3.5L (2GR-FE) (2010)
Installation
SEAT BELT: REAR CENTER SEAT INNER BELT ASSEMBLY: INSTALLATION
1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY
(a) Install the rear center seat inner belt assembly with the nut.
Text in Illustration
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
NOTICE:
Do not allow the anchor part of the rear seat outer belt assembly to overlap the protruding part of the floor panel.
2. INSTALL REAR SEAT ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for
LH Side)/Installation
3. CONNECT REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal
and Replacement/Rear Seat Assembly (for LH Side)/Installation
4. INSTALL REAR SEAT INNER TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear
Seat Assembly (for LH Side)/Installation
5. INSTALL REAR SEAT OUTER TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear
Seat Assembly (for LH Side)/Installation
6. INSTALL REAR SEAT HEADREST ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly (for LH Side)/Installation
Components
SEAT BELT: REAR CENTER SEAT OUTER BELT ASSEMBLY: COMPONENTS