Venza FWD V6-3.5L (2GR-FE) (2010)
Trunk / Liftgate Switch: Service and Repair
Power Back Door Control Switch
Components
DOOR / HATCH: POWER BACK DOOR CONTROL SWITCH: COMPONENTS
Removal
DOOR / HATCH: POWER BACK DOOR CONTROL SWITCH: REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
and Replacement/Removal
3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
4. REMOVE BACK DOOR CONTROL SWITCH
(a) Disengage the 2 claws and remove the back door control switch.
Installation
DOOR / HATCH: POWER BACK DOOR CONTROL SWITCH: INSTALLATION
1. INSTALL BACK DOOR CONTROL SWITCH
(a) Engage the 2 claws to install the back door control switch.