Venza FWD V6-3.5L (2GR-FE) (2010)
Repair/Removal and Replacement/Removal
18. SEPARATE PARKING BRAKE PEDAL ASSEMBLY
(a) Turn back the floor carpet.
(b) Disconnect the heated oxygen sensor connector and disengage the 2 clamps (for 2GR-FE).
(c) Remove the bolt and nut, and separate the No. 1 parking brake cable assembly from the body.
(d) Disconnect the parking brake switch connector.
(e) Remove the 3 nuts and separate the parking brake pedal assembly from the body.
19. REMOVE PARKING BRAKE SWITCH ASSEMBLY
(a) Remove the screw and parking brake switch assembly.