Venza FWD V6-3.5L (2GR-FE) (2010)
6. REMOVE OXYGEN SENSOR (for Bank 1 Sensor 2)
(a) Using SST, remove the oxygen sensor from the No. 3 front exhaust pipe sub-assembly.
SST : 09224-00010
7. REMOVE FRONT EXHAUST PIPE ASSEMBLY See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and
Repair/Removal
8. REMOVE NO. 2 OXYGEN SENSOR (for Bank 2 Sensor 2)
(a) Using SST, remove the No. 2 oxygen sensor from the front exhaust pipe assembly.
SST : 09224-00010
Installation
2GR-FE ENGINE CONTROL: HEATED OXYGEN SENSOR: INSTALLATION
1. INSTALL NO. 2 OXYGEN SENSOR (for Bank 2 Sensor 2)
(a) Using SST, install the No. 2 oxygen sensor to the front exhaust pipe assembly.
Text in Illustration