Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-412001.png)
Oxygen Sensor: Testing and Inspection
Heated Oxygen Sensor
2GR-FE ENGINE CONTROL: HEATED OXYGEN SENSOR: INSPECTION
1. INSPECT OXYGEN SENSOR (for Bank 1 Sensor 2)
(a) Measure the resistance according to the value(s) in the table below.
Text in Illustration
Standard Resistance:
(b) If the resistance is not as specified, replace the oxygen sensor.
2. INSPECT NO. 2 OXYGEN SENSOR (for Bank 2 Sensor 2)
(a) Measure the resistance according to the value(s) in the table below.
Text in Illustration
Standard Resistance:
