Venza FWD V6-3.5L (2GR-FE) (2010)
Seat Occupant Sensor: Service and Repair
Removal
SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION ECU: REMOVAL
1. PRECAUTION
CAUTION:
Be sure to read Precaution thoroughly before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
2. REMOVE FRONT SEAT ASSEMBLY RH
HINT
Use the same procedure for the RH side and the LH side.
for Manual Seat: See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Manual Seat)/Removal
for Power Seat: See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Power Seat)/Removal
3. REMOVE OCCUPANT CLASSIFICATION ECU
(a) Disconnect the connector from the occupant classification ECU.
Text in Illustration
(b) Using a screwdriver with the tip wrapped with protective tape, disengage the claw to remove the occupant classification ECU.