Venza FWD V6-3.5L (2GR-FE) (2010)
Power Window Switch: Service and Repair
Rear Power Window Switch
Components
WINDOW / GLASS: REAR POWER WINDOW SWITCH: COMPONENTS
Removal
WINDOW / GLASS: REAR POWER WINDOW SWITCH: REMOVAL
HINT
*
Use the same procedure for the RH side and LH side.
*
The procedure listed below is for the LH side.
1. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL See: Body and
Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Disassembly
2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Disengage the 2 claws and remove the power window regulator switch assembly.
Installation
WINDOW / GLASS: REAR POWER WINDOW SWITCH: INSTALLATION