Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-534002.png)
HINT
*
Use the same procedure for the RH side and LH side.
*
The procedure listed below is for the LH side.
1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Engage the 2 claws and install the power window regulator switch assembly.
2. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL See: Body and
Frame/Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Reassembly
