Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-1532005.png)
(c) Place a new generator washer on the generator rotor.
2. INSTALL GENERATOR CLUTCH PULLEY
(a) Temporarily install the clutch pulley onto the rotor shaft.
(b) Mount the generator drive end frame in a vise tightly.
(c) Confirm SST (A) and (B) shown in the illustration.
Text in Illustration
SST : 09820-63021
(d) Place the rotor shaft end into SST (A).
