Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-1569007.png)
2. INSTALL SIDE TRIM COVER RH (w/ Voltage Inverter) See: Accessories and Optional Equipment/Entertainment Systems/Auxiliary Input /
Output Jack/Service and Repair/Installation
3. INSTALL REAR POWER POINT SOCKET COVER
(a) Engage the 2 claws to install the rear power point socket cover.
4. INSTALL REAR POWER POINT SOCKET ASSEMBLY
(a) Engage the 2 claws to install the rear power point socket assembly as shown in the illustration.
5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
and Replacement/Installation
6. CONNECT REAR SEAT OUTER BELT ASSEMBLY RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.
7. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.
8. INSTALL RECLINING REMOTE CONTROL BEZEL RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.
9. INSTALL REAR SEAT ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for
RH Side)/Installation
10. CONNECT REAR SEAT RECLINING CONTROL CABLE See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear
Seat Assembly (for RH Side)/Installation
11. INSTALL REAR SEAT OUTER TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear
Seat Assembly (for RH Side)/Installation
12. INSTALL REAR SEAT INNER TRACK BRACKET COVER See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear
Seat Assembly (for RH Side)/Installation
13. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear
