Venza FWD V6-3.5L (2GR-FE) (2010)
Torque : 35 Nm (357 kgf-cm, 26 ft-lbf)
11. TEMPORARILY TIGHTEN PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY (for AWD)
HINT
Refer to the procedure from Temporarily Tighten Propeller With Center Bearing Shaft Assembly See: Engine, Cooling and
Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation.
12. INSTALL FRONT EXHAUST PIPE ASSEMBLY
HINT
Refer to the procedure from Install Front Exhaust Pipe Assembly See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation.