Venza FWD V6-3.5L (2GR-FE) (2010)
Front Cross-Member: Service and Repair
Removal
FRONT SUSPENSION: FRONT SUSPENSION MEMBER: REMOVAL
1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (for 2GR-FE)
HINT
Refer to the procedure up to Remove Engine Assembly with Transaxle See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal.
2. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (for 1AR-FE)
HINT
Refer to the procedure up to Remove Engine Assembly with Transaxle See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal.
3. REMOVE FRONT NO. 1 STABILIZER BRACKET LH See: Stabilizer Bar/Service and Repair/Front Stabilizer Bar/Removal
4. REMOVE FRONT NO. 1 STABILIZER BRACKET RH
HINT
Perform the same procedure as the LH side.
5. REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY
6. REMOVE STEERING LINK ASSEMBLY See: Steering/Steering Gear/Service and Repair/Removal
7. DISCONNECT FRONT FRAME ASSEMBLY (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
8. REMOVE FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal
9. REMOVE ENGINE MOUNTING INSULATOR LH (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
10. REMOVE ENGINE MOUNTING INSULATOR RH (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
11. REMOVE REAR ENGINE MOUNTING INSULATOR (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal
and Replacement/Engine Assembly/Removal
12. REMOVE FRONT FRAME ASSEMBLY (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
13. REMOVE FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal
14. REMOVE ENGINE MOUNTING INSULATOR LH (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
15. REMOVE ENGINE MOUNTING INSULATOR RH (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
16. REMOVE REAR ENGINE MOUNTING INSULATOR (for 1AR-FE AWD) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Removal
17. REMOVE FRONT LOWER SUSPENSION ARM LH See: Control Arm/Service and Repair/Front Lower Suspension Arm/Removal
18. REMOVE FRONT LOWER SUSPENSION ARM RH
HINT
Perform the same procedure as the LH side.