Venza FWD V6-3.5L (2GR-FE) (2010)
SST : 09502-12010
SST : 09515-30010
SST : 09950-60020
09951-00890
SST : 09950-70010
09951-07100
HINT
Slowly press in the mounting cushion.
(c) While observing from the side, press in the rear suspension member body mounting front cushion LH until there is no clearance between the
rear suspension member body mounting front cushion LH and the rear suspension member sub-assembly as shown in the illustration.
NOTICE:
Do not press the rear suspension member excessively, or it will easily deform.
5. INSTALL REAR SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION RH
(a) Temporarily install a new rear suspension member body mounting front cushion RH to the position shown in the illustration.
(b) Using SST and a press, install the rear suspension member body mounting front cushion RH to the rear suspension member sub-assembly.