Venza FWD V6-3.5L (2GR-FE) (2010)
(a) Remove the nut and separate the front stabilizer link assembly LH.
HINT
If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.
3. SEPARATE FRONT STABILIZER LINK ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
4. REMOVE FRONT NO. 1 STABILIZER BRACKET LH
(a) Remove the 2 bolts and No. 1 front stabilizer bracket LH from the front frame assembly.
5. REMOVE FRONT NO. 1 STABILIZER BRACKET RH
HINT
Perform the same procedure as the LH side.
6. REMOVE FRONT STABILIZER BAR
7. REMOVE FRONT NO. 2 STABILIZER BRACKET LH
(a) Remove the No. 2 front stabilizer bracket LH from the front stabilizer bar bushing.
8. REMOVE FRONT NO. 2 STABILIZER BRACKET RH
HINT
Perform the same procedure as the LH side.
9. REMOVE FRONT NO. 1 STABILIZER BAR BUSHING
(a) Remove the 2 No. 1 front stabilizer bar bushings from the front stabilizer bar.
Installation