Venza FWD V6-3.5L (2GR-FE) (2010)
HINT
Align the cutout on the rear shock absorber assembly with the protrusion on the rear suspension support assembly by referring to the
illustration.
6. INSTALL REAR SUPPORT TO REAR SHOCK ABSORBER COLLAR
(a) Install the rear support to rear shock absorber collar to the rear shock absorber assembly.
7. TEMPORARILY INSTALL REAR SUPPORT TO REAR SHOCK ABSORBER NUT
(a) Using a screwdriver or an equivalent tool to hold the rear suspension support assembly, temporarily install a new rear support to rear shock
absorber nut to the rear shock absorber assembly.
Text in Illustration
NOTICE:
*
Do not reuse the old rear support to rear shock absorber nut,
*
Use a new rear support to rear shock absorber nut.
HINT
Tape the screwdriver or the equivalent tool before use.
8. INSTALL REAR COIL SPRING
(a) Install the rear coil spring.