Venza FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
Torque : 39 Nm (400 kgf-cm, 29 ft-lbf)
HINT
If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.
13. INSTALL REAR STABILIZER LINK ASSEMBLY (for AWD)
(a) Install the rear stabilizer link assembly to the rear shock absorber with coil spring with the nut.
Text in Illustration
Torque : 39 Nm (400 kgf-cm, 29 ft-lbf)
HINT
If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud bolt.
14. INSTALL REAR SPEED SENSOR WIRE (for 2WD)
(a) Install the rear speed sensor wire to the rear shock absorber with coil spring with the bolt.
Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)
NOTICE:
Do not twist the rear speed sensor wire when installing it.
15. INSTALL REAR SPEED SENSOR (for AWD)