Venza FWD V6-3.5L (2GR-FE) (2010)
NOTICE:
Make sure that the claws are firmly engaged.
9. INSTALL POSITION INDICATOR LIGHT GUIDE
(a) Engage the 4 claws to install the position indicator connector and position indicator light guide to the lower position indicator housing.
NOTICE:
Make sure that the claws are firmly engaged.
10. INSTALL POSITION INDICATOR HOUSING SUB-ASSEMBLY
(a) Engage the 4 claws to install the position indicator housing sub-assembly to the lower position indicator housing.
NOTICE:
Make sure that the claws are firmly engaged.
(b) Install the shift lever cap to the position indicator housing sub-assembly.