Venza FWD V6-3.5L (2GR-FE) (2010)
Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)
NOTICE:
*
In order to ensure proper sealing of the transmission oil pan bolts, apply adhesive to the bolts and install them within 10 minutes
of adhesive application.
*
Completely remove any oil or grease from the contact surface of the transaxle case and oil pan sub-assembly with the gasket
before installation.
5. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
HINT
See the steps from "Install Automatic Transaxle Assembly" through "Check Automatic Transaxle System" See: Service and
Repair/Removal and Replacement/Installation.