Venza FWD V6-3.5L (2GR-FE) (2010)
Transmission Speed Sensor: Service and Repair
Removal
U660E AUTOMATIC TRANSMISSION / TRANSAXLE: SPEED SENSOR: REMOVAL
1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY
HINT
See the steps from "Remove Engine Assembly with transaxle" through "Remove Automatic Transaxle Assembly" See: Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Removal.
2. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY See: Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Removal and Replacement/Removal
3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal
and Replacement/Removal
4. REMOVE TRANSMISSION VALVE BODY ASSEMBLY See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal
and Replacement/Removal
5. REMOVE SPEED SENSOR
(a) Disconnect the connector.
(b) Remove the 2 bolts and speed sensor from the valve body.