toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Components|Page 10116 > < Components|Page 10114
Page 4
background image

(h) Disconnect the windshield glass stoppers.

NOTICE:
*

There are No. 1 and No. 2 stoppers on the windshield glass as shown in the illustration.

*

To prevent the windshield glass from dropping when performing this operation, be sure to hold the windshield glass using suction
cups.

HINT
Depending on vehicles, 1-piece or 2-piece type stoppers are used.

(i) Using suction cups, remove the windshield glass.

NOTICE:
*

Be careful not to drop the windshield glass.

*

Leave as much adhesive on the vehicle body as possible when removing the windshield glass.

24. REMOVE WINDOW GLASS ADHESIVE DAM

(a) Using a scraper, remove the window glass adhesive dam.

NOTICE:
*

Be careful not to damage the windshield glass.

*

Be sure to replace the window glass adhesive dam with a new one.

25. REMOVE WINDSHIELD GLASS RETAINER

Components|Page 10116 > < Components|Page 10114