Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-2850008.png)
Standard Dimension:
NOTICE:
*
Do not apply too much primer.
*
Allow the primer to dry for 3 minutes or more.
*
Throw away any leftover primer.
HINT
*
Apply Primer G onto the ceramic notches.
*
If an area other than that specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries.
(d) Apply adhesive to the glass.
Adhesive:
Toyota Genuine Windshield Glass Adhesive or equivalent
(1) Cut off the tip of the cartridge nozzle as shown in the illustration.
Standard Dimension:
HINT
After cutting off the tip, use all adhesive within the time described in the table below.
Usage Time Frame:
