Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-2893006.png)
Torque : 7.0 Nm (71 kgf-cm, 62 in-lbf)
(b) Connect the connector.
3. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
(a) Engage the 13 claws and install the cowl top ventilator louver sub-assembly as shown in the illustration.
(b) Install the 2 clips.
4. INSTALL FRONT FENDER TO COWL SIDE SEAL LH
