Venza FWD V6-3.5L (2GR-FE) (2010)
Wiper Switch: Service and Repair
Installation
WIPER / WASHER: WIPER SWITCH: INSTALLATION
1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Engage the claw to install the windshield wiper switch assembly as shown in the illustration.
(b) Connect the 2 connectors.
2. INSTALL UPPER STEERING COLUMN COVER
(a) Engage the 3 claws and 4 clips to install the upper steering column cover to the lower instrument cover.
3. INSTALL LOWER STEERING COLUMN COVER
(a) Engage the 3 claws to install the lower steering column cover to the upper steering column cover.
(b) Turn the steering wheel assembly to the left and install the screw shown in the illustration.