toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Security Horn Assembly (For Sedan)|Page 7200 > < Security Horn Assembly (For Sedan)

Yaris L4-1.5L (1NZ-FE) (2007)

Page 2
background image

2. REMOVE SECURITY HORN ASSEMBLY

a. Disconnect the connector.
b. Remove the nut and the security horn.

INSTALLATION 

1. INSTALL SECURITY HORN ASSEMBLY

a. Install the security horn with the nut.

Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf) 

b. Connect the connector.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

Security Horn Assembly (For Sedan)|Page 7200 > < Security Horn Assembly (For Sedan)