Yaris L4-1.5L (1NZ-FE) (2007)
/Page-1355007.png)
5. INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type)
a. for RH Side:
1. Install the rear seat assembly.
b. for LH Side:
1. Install the rear seat assembly.
6. INSTALL NO. 2 REAR SEAT LEG COVER (for 60/40 Split Seat Type)
7. INSTALL NO. 1 REAR SEAT LEG COVER (for 60/40 Split Seat Type)
a. for RH Side:
1. Install the No. 1 rear seat leg cover.
b. for LH Side:
1. Install the No. 1 rear seat leg cover.
8. INSTALL REAR SEATBACK ASSEMBLY (for Hold Down Seat Type)
9. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY (for Hold Down Seat Type)
10. INSTALL DECK FLOOR BOX
a. for RH Side:
1. Install the deck floor box.
b. for LH Side:
1. Install the deck floor box.
HINT: Use the same procedure as for the RH side.
11. INSTALL DECK BOARD SUB-ASSEMBLY
12. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
