Yaris L4-1.5L (1NZ-FE) (2007)
b. w/o Curtain Shield Airbag:
1. Pass the rear seat outer belt through the slit in the roof side inner garnish.
2. Engage the 4 clips and the claw and install the roof side inner garnish.
45. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY
46. INSTALL CENTER PILLAR UPPER GARNISH RH
a. Engage the 2 clips and install the center pillar upper garnish.
47. INSTALL CENTER PILLAR UPPER GARNISH LH
HINT: Use the same procedure as for the RH side.
48. INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH
a. Install the through anchor with the bolt.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
49. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH
HINT: Use the same procedure as for the RH side.