Yaris L4-1.5L (1NZ-FE) (2007)
/Page-1404024.png)
d. Remove the No. 1 roof wire from the claw of the room light.
e. Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light switch base and the room light.
48. REMOVE MAP LIGHT ASSEMBLY
a. Using a roof moulding remover, disengage the 4 claws.
b. Disconnect the map light connector and remove the map light.
49. REMOVE FRONT PILLAR GARNISH RH
