Yaris L4-1.5L (1NZ-FE) (2007)
4. INSTALL BRAKE PEDAL SUPPORT
(a)
Install the pedal support with the bolt and 4 nuts.
Torque: Bolt
24 N*m (241 kgf*cm, 17 ft.*lbf)
Nut
9.0 N*m (92 kgf*cm, 80 in.*lbf)
5. INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS
(a)
Apply lithium soap base glycol grease to the push rod pin.
(b) Install the push rod clevis with the push rod pin and clip.
(c)
Install the brake pedal return spring.
6. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER
(a)
Install a new stop light switch mounting adjuster onto the pedal support.