Yaris L4-1.5L (1NZ-FE) (2007)
58. CONNECT HEATER WATER INLET HOSE A
a. Install the heater water inlet hose onto the heater unit.
NOTE: Perform the installation with the hose clip and mark at the correct angle.
59. CONNECT HEATER WATER OUTLET HOSE A (FROM HEATER UNIT)
a. Install the heater water outlet hose onto the heater unit.
NOTE: Perform the installation with the hose clip and mark at the correct angle.
60. INSTALL LIQUID TUBE SUB-ASSEMBLY
a. Remove the vinyl tape from liquid tube and the connecting portion of the unit.
b. Apply sufficient compressor oil (ND-OIL8) to a new O-ring and the connecting part of liquid tube.
Compressor oil: ND-OIL8 or the equivalent
c. Install the O-ring onto liquid tube.
d. connect liquid tube to the unit.
61. INSTALL SUCTION TUBE SUB-ASSEMBLY
a. Remove the vinyl tape from the suction tube and the connecting part of the unit.
b. Apply sufficient compressor oil (ND-OIL8) to a new O-ring and the connecting part of suction tube.
Compressor oil: ND-OIL8 or the equivalent
c. Install the O-ring onto the suction tube.