Yaris L4-1.5L (1NZ-FE) (2007)
6.
Position the net as shown in the illustration and secure the top of the net to the blower unit bracket using one of the tie wraps provided in the kit.
NOTE:
Keep the tie wrap loose to allow easy positioning of the net.
7.
Secure the bottom of the net to the blower unit with the two screws that are provided in the kit.
NOTE:
Screws should attach to the bosses on the blower unit.
8.
Using the other tie wrap provided in the kit, secure the other corner of the net by passing the tie wrap through the newly drilled hole.