Yaris L4-1.5L (1NZ-FE) (2007)
3. REMOVE LIGHT CONTROL RHEOSTAT
a. Disconnect the connector.
b. Disengage the 2 claws and remove the light control rheostat.
INSTALLATION
1. INSTALL LIGHT CONTROL RHEOSTAT
a. Engage the 2 claws and install the light control rheostat.
b. Connect the connector.
2. INSTALL INSTRUMENT PANEL BOX
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)