Yaris L4-1.5L (1NZ-FE) (2007)
/Page-319005.png)
^
When inspecting a belt which has been used for over 5 minutes, apply the used belt specifications.
^
When reinstalling a belt which has been used for over 5 minutes, adjust its deflection and tension to the intermediate values of each used
belt specification.
^
V-ribbed belt tension and deflection should be checked after 2 revolutions of engine cranking.
^
When using a belt tension gauge, confirm its accuracy by using a master gauge first.
4. INSTALL ENGINE UNDER COVER RH
