toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Emissions - MIL ON/Multiple EVAP DTC's Set|Page 1436 > < Emissions - MIL ON/Multiple EVAP DTC's Set
Page 2
background image

Parts Information

Required Tools & Equipment

Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE).

Repair Procedure

1. Using TIS Techstream check for DTCs P043E, P043F, P2401, P2402, and P2419.

A. If the above DTCs are present proceed to step 2.

B. If all 5 DTCs are NOT present this TSB does NOT apply continue diagnostics per the Repair Manual.

2. Check for water or debris in the EVAP system by disconnecting the vent hose from the key-off pump module.

Is water or debris present in the vent hose?

A. YES - Proceed to step 3.

B. NO - This TSB does NOT apply continue diagnostics per the Repair Manual.

3. Replace the charcoal canister and charcoal canister filter No.2 as outlined in the Repair Manual.

^

2007 / 2008 / 2009 / 2010 / 2011 Yaris:
Engine/Hybrid System - Emission Control - "Canister Removal"

^

2007 / 2008 / 2009 / 2010 / 2011 Yaris:
Engine/Hybrid System - Emission Control - "Canister: Installation"

4. Remove fuel tank filler pipe protector and retain fasteners.

Emissions - MIL ON/Multiple EVAP DTC's Set|Page 1436 > < Emissions - MIL ON/Multiple EVAP DTC's Set