Yaris L4-1.5L (1NZ-FE) (2007)
/Page-742006.png)
b. Tighten the 3 bolts to the specified torque.
Torque: 19 Nm (194 kgf.cm, 14 ft. lbs.) for bolt A 9.0 Nm (92 kgf.cm, 80 in. lbs.) for bolt
5. CONNECT FUEL TUBE SUB-ASSEMBLY
a. Insert the fuel tube connector into the fuel delivery pipe until a click sound can be heard.
NOTE:
-
Check that there are no scratches or foreign matter around the disconnected parts of the fuel tube connector and pipe before performing this
work.
-
After connecting the fuel tube, check that the fuel tube connector and pipe are securely connected by pulling them.
b. Install the fuel pipe clamp.
6. INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY
a. Apply seal packing to the cylinder head as shown in the illustration.
