Yaris L4-1.5L (1NZ-FE) (2007)
2. INSTALL FUEL PUMP GAUGE RETAINER
a. Using SST, turn the retainer 540° clockwise from the screw starting point and align the claw of the retainer with the match mark on the fuel
tank.
SST 09808-14020 (09808-01410, 09808-01420, 09808-01430)
NOTE: Replace the fuel pump gauge retainer with a new one if not installed properly. Part No. 77144-52040
HINT:
-
Align the claws of the fuel pump gauge retainer with the tips of SST.
-
At the point where the retainer is turned 90° from the start of the thread, push the retainer in from the opposite side to the start of the
thread. Check that the thread of the retainer is properly engaged with that on the tank.
3. CONNECT FUEL TANK VENT HOSE SUB-ASSEMBLY
a. Connect the fuel tank vent hose.