Yaris L4-1.5L (1NZ-FE) (2007)
Accelerator Pedal Position Sensor: Testing and Inspection
ON-VEHICLE INSPECTION
1. INSPECT ACCELERATOR PEDAL ASSEMBLY
a. Connect an intelligent tester to the DLC3.
b. Turn the ignition switch ON and turn the tester ON.
c. Select the following menu items: Powertrain / Engine and ECT / Data List / Accelerator Pedal Position No. 1 and Accelerator Pedal Position
No. 2.
d. While the accelerator pedal is depressed or released, check that the values of accelerator pedal position No. 1 and accelerator pedal position
No. 2 are within the specifications.
Accelerator Pedal Position No. 1 Standard Voltage
Accelerator Pedal Position No. 2 Standard Voltage
HINT: If the results are not as specified, check the accelerator pedal, wire harness or ECM.