Yaris L4-1.5L (1NZ-FE) (2007)
/Page-516001.png)
Camshaft Position Sensor: Testing and Inspection
INSPECTION
1. INSPECT CRANKSHAFT POSITION SENSOR
a. Check the resistance.
1. Using an ohmmeter, measure the resistance between the terminals. Standard resistance Temperature Specified Condition
HINT: In the table , the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50 °C (14 to 122 °F).
Hot means approximately 50 to 100 °C (122 to 212 °F).
If the resistance is not as specified, replace the crankshaft position sensor.
